The blower motor is operated by signals from the air conditioning amplifier. Blower motor speed signals are transmitted in accordance with changes in the duty ratio.
WIRING DIAGRAM
INSPECTION PROCEDURE
1. PERFORM ACTIVE TEST USING INTELLIGENT TESTER (BLOWER MOTOR)
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG) and turn the intelligent tester main switch on.
Select the item below in the Active Test, and then check that the blower motor operates.
Active Test / Air Conditioner:
Tester Display
Test Part
Control Range
Diagnostic Note
Blower Motor
Blower motor
Min.: 0, Max.: 31
-
Result:
Result
Proceed to
NG (blower motor does not operate)
A
NG (blower motor operates but does not change speed)