2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

B1497/97 BUS IC Communication Malfunction

Diagnostic trouble codes · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

DESCRIPTION

The air conditioning harness connects the air conditioning amplifier and the servos. The air conditioning amplifier supplies power and sends operation instructions to each servo through the air conditioning harness. Each servo sends damper position information to the air conditioning amplifier.
DTC No.
DTC Detection Condition
Trouble Area
B1497/97
Communication line error or open
  1. Air conditioning harness
  2. Air conditioning amplifier

WIRING DIAGRAM

E142541E04

INSPECTION PROCEDURE


1. CHECK AIR CONDITIONING AMPLIFIER

  1. E127567E16
    Remove the air conditioning amplifier (Click here) with its connectors still connected.

  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    z17-2 (BUS G) - Body ground
    Always
    Below 1 Ω



NG
CHECK GROUND LINE AND AIR CONDITIONING AMPLIFIER
OK


2. CHECK AIR CONDITIONING AMPLIFIER

  1. E127567E17
    Remove the air conditioning amplifier (Click here) with its connectors still connected.

  1. Measure the voltage according to the value(s) in the table below.

    Standard voltage:
    Tester Connection
    Condition
    Specified Condition
    z17-2 (BUS G) - z17-4 (B BUS)
    Ignition switch on (IG)
    11 to 14 V
    z17-2 (BUS G) - z17-3 (BUS)
    Ignition switch on (IG)
    Pulse generation



NG
REPLACE AIR CONDITIONING AMPLIFIER (Click here)
OK

REPLACE AIR CONDITIONING HARNESS ASSEMBLY


← B1497/97 BUS IC Communication Malfunction (Aug 2008 – Jun 2010)B1499/99 Multiplex Communication Circuit (May 2007 – Jul 2008) →