2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE AIR CONDITIONING UNIT
(Click here)

2. REMOVE BLOWER ASSEMBLY

  1. E151015
    Disconnect the connector.

  1. Remove the 2 screws.

  1. Disengage the 2 claws and remove the blower assembly.


3. REMOVE AIR INLET SERVO MOTOR SUB-ASSEMBLY

  1. E151034
    Remove the 3 screws and air inlet servo motor sub-assembly.

← REMOVAL (Aug 2008 – Jun 2010)INSTALLATION (May 2007 – Jul 2008) →