2007-2013 Highlander Kluger · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL FUEL PUMP RESISTOR

  1. A175692
    Install the fuel pump resistor cover.

  1. A175691
    Install the fuel pump resistor with the nut.

    Torque:
    19 N*m{ 194 kgf*cm , 14 ft.*lbf }

  1. Connect the connector.


2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


3. INSPECT SRS WARNING LIGHT
  1. Inspect the SRS warning light (Click here).

← INSPECTION (from May 2007)INSTALLATION (Aug 2008 – Jun 2010) →