INSTALLATION
Removal / installation · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL FUEL PUMP RESISTOR |
 |
- Install the fuel pump resistor cover.
- Install the fuel pump resistor with the nut.
-
Torque:
- 19 N*m{
194 kgf*cm
, 14 ft.*lbf
}
Connect the connector.
| 2.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
|
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 3.
INSPECT SRS WARNING LIGHT
|
 |
Inspect the SRS warning light (Click here).