2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL TRANSMITTER BATTERY (for RHD)

  1. B174113
    Install a new battery (lithium battery) with the positive (+) side up, as shown in the illustration.

  1. B174114
    Press down gently on the battery to set it in place.

    NOTICE:
    1. Be careful not to bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.

  1. B174115
    Install the case securely.


2. INSTALL TRANSMITTER BATTERY (for LHD)

  1. B102768
    Install a battery (lithium battery: CR2016) with the positive (+) side facing upward, as shown in the illustration.

    NOTICE:
    1. Be careful not to bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.

  1. B137137
    Install the cover.


3. INSTALL DOOR CONTROL TRANSMITTER MODULE (for LHD)

  1. B137125
    Install the door control transmitter module into the transmitter housing case, and install the transmitter housing cover securely onto the transmitter housing case.


4. INSTALL TRANSMITTER HOUSING COVER (for LHD)

  1. B107831
    Install the transmitter housing cover to the transmitter housing case.

  1. Check that the transmitter's LED illuminates when the switch is pressed.

    OK:
    Transmitter's LED illuminates when switch is pressed.

← INSPECTION (from Jul 2010)INSTALLATION (from Jul 2010) →