2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL TRANSMITTER BATTERY (for LHD)

  1. B209086
    Install a battery (lithium battery: CR2032) with the positive (+) side facing upward as shown in the illustration.

    NOTICE:
    1. Be careful not to bend the terminals of the transmitter battery during installation.
    2. Keep the interior of the transmitter case free of dust, water and oil.

  1. B221463
    Install the transmitter housing case.


2. INSTALL TRANSMITTER BATTERY (for RHD)

  1. B174113
    Install a new battery (lithium battery) with the positive (+) side up, as shown in the illustration.

  1. B174114
    Press down gently on the battery to set it in place.

    NOTICE:
    1. Be careful not to bend the transmitter battery electrode during insertion.
    2. Keep the transmitter cover interior free of dust and oil.

  1. B174115
    Install the case securely.

← INSTALLATION (May 2007 – Jun 2010)COMPONENTS (from May 2007) →