2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT POWER WINDOW MASTER SWITCH (for Driver Side)

  1. for LHD:

    1. B164359E13
      Measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Locked
      Below 1 Ω
      1 - 2
      1 - 9
      OFF (Free)
      10 kΩ or higher
      1 - 9
      Unlocked
      Below 1 Ω

      If the result is not specified, replace power window master switch.

  1. for RHD:

    1. B164359E17
      Measure the resistance according to the value(s) in the table below.

      Standard resistance:
      Tester Connection
      Condition
      Specified Condition
      9 - 2
      Locked
      Below 1 Ω
      9 - 2
      9 - 8
      OFF (Free)
      10 kΩ or higher
      9 - 8
      Unlocked
      Below 1 Ω

      If the result is not specified, replace power window master switch.


INSPECT DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side)

  1. B171374E02
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    4 - 3
    Locked
    Below 1 Ω
    4 - 3
    2 - 3
    OFF (Free)
    10 kΩ or higher
    2 - 3
    Unlocked
    Below 1 Ω

    If the result is not specified, replace door control switch assembly.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →