2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE FRONT ARMREST UPPER BASE PANEL

  1. B172922E01
    Using a screwdriver with the tip wrapped with protective tape, disengage the 7 claws and clip, and remove the front armrest upper base panel.

  1. Disconnect the connector.


2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side)

  1. B172926
    Remove the 3 screws and the power window regulator master switch assembly.


3. REMOVE DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side)

  1. B174116
    Disengage the 2 claws and remove the door control switch assembly.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →