REMOVAL
Removal / installation · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
REMOVE FRONT ARMREST UPPER BASE PANEL
|
 |
- Using a screwdriver with the tip wrapped with protective tape, disengage the 7 claws and clip, and remove the front armrest upper base panel.
Disconnect the connector.
| 2.
REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (for Driver Side) |
 |
- Remove the 3 screws and the power window regulator master switch assembly.
| 3.
REMOVE DOOR CONTROL SWITCH ASSEMBLY (for Front Passenger Side) |
 |
- Disengage the 2 claws and remove the door control switch assembly.