2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

  1. B175040
    Disengage the 2 claws and the cover.

  1. B175041
    Pull the lever in the direction indicated by the arrow shown in the illustration and slide the inner rear view mirror assembly upward to remove it.


2. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

  1. B175048E01
    Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.

  1. B175049
    Disengage the 2 claws and remove the inner rear view mirror stay holder cover.


3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

  1. B175042
    Disconnect the connector.

  1. Using a "TORX" socket wrench (T20), remove the screw and the inner rear view mirror.

← CALIBRATION (from Jul 2010)REMOVAL (from Jul 2010) →