2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror)

  1. for Type A:

    1. B175040
      Disengage the 2 claws and disconnect the inner mirror base cover.

    2. B175041E01
      Pull the lock lever in the direction indicated by the arrow in the illustration, and slide the inner rear view mirror assembly upward to remove it.
      Text in Illustration 
      *1
      Lock Lever

  1. for Type B:

    1. B279254
      Using a T20 "TORX" socket wrench, remove the screw.

    2. B280442
      Slide the inner rear view mirror assembly in the direction indicated by the arrow shown in the illustration to remove it.


2. REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER (w/ EC Mirror)

  1. B175048E01
    Disengage the 2 claws and slide the inner rear view mirror stay holder cover as shown in the illustration.

  1. B175049
    Disengage the 2 claws and remove the inner rear view mirror stay holder cover.


3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror)

  1. B175042
    Disconnect the connector.

  1. Using a "TORX" socket wrench (T20), remove the screw and the inner rear view mirror.

← REMOVAL (May 2007 – Jun 2010)INSPECTION (May 2007 – Jun 2010) →