2007-2013 Highlander Kluger · Service Manual DRIVE LINE

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT REAR DRIVE SHAFT ASSEMBLY

  1. C091598E03
    Check that there is no remarkable play in the radial direction of the outboard joint.

  1. Check that the inboard joint slides smoothly in the thrust direction.

  1. Check that there is no remarkable play in the radial direction of the inboard joint.

  1. Check the boots for damage.

← DISASSEMBLY (from May 2007)REASSEMBLY (from May 2007) →