2007-2013 Highlander Kluger · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. REMOVE FRONT BUMPER ASSEMBLY

HINT:
(Click here)


2. DRAIN AUTOMATIC TRANSAXLE FLUID
  1. Remove the drain plug and the gasket, and drain ATF.

  1. Install a new gasket and the drain plug.

    Torque:
    49 N*m{ 500 kgf*cm , 36 ft.*lbf }


3. REMOVE OIL WITH HOSE COOLER ASSEMBLY

  1. C167672
    Remove the 2 hose clamps and disconnect the 2 oil cooler hoses.

  1. Remove the bolt, nut, and the oil with hose cooler assembly.

← COMPONENTS (from Jul 2010)REMOVAL (from Jul 2010) →