2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

Pressing Power Switch does not Turn on System

Circuit diagnosis · Vehicles built from Jul 2010

INSPECTION PROCEDURE


1. CHECK CABIN (HUMIDITIY)
  1. Check that conditions in the cabin are not likely to cause condensation.

    HINT:
    This problem occurs if the cabin is humid and the temperature rapidly changes. This condition may produce condensation, resulting in a short circuit.

    OK:
    Condensation is not likely to occur.



NG
DRY CABIN AND RECHECK CONDITIONS
OK


2. CHECK CABIN (TEMPERATURE)
  1. Check that the temperature in the cabin is neither -20°C (-4°F) or lower nor 65°C (149°F) or higher.

    HINT:
    The navigation system may not operate normally when the temperature is -20°C (-4°F) or lower, or 65°C (149°F) or higher.

    OK:
    Temperature in the cabin is between -20°C (-4°F) and 65°C (149°F).



NG
HEAT OR COOL CABIN AND RECHECK TEMPERATURE
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)


← Noise Occurs (from Jul 2010)No Sound can be Heard from Speakers (from Jul 2010) →