2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

No Sound can be Heard from Speakers

Circuit diagnosis · Vehicles built from Jul 2010

INSPECTION PROCEDURE


1. CHECK AUDIO SETTINGS

  1. E176537E07
    Enter the "Sound Settings" screen by pressing the "Sound" switch on the audio display.

  1. Set volume, fader and balance to the initial values and check that sound is normal.

    OK:
    Audio system returns to normal.

    HINT:
    Sound quality adjustment measures vary according to the type of the amplifier.

Text in Illustration 
*a
Example


NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

END


← Pressing Power Switch does not Turn on System (from Jul 2010)CD cannot be Ejected (from Jul 2010) →