2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from May 2007

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

Air conditioning system 
Display (Item)
Default
Contents
Setting
Set Temperature Shift
NORMAL
To control with shifted temperature against displayed temperature
+2 C / +1 C / NORMAL / -1 C / -2 C
Ambient Temperature Shift
NORMAL
To control with shifted temperature against displayed temperature
+3 C / +2 C / +1 C / NORMAL / -1 C / -2 C / -3 C
Air Inlet Mode
AUTO
Function to shift from INLET mode to RECIRCULATION mode when A/C is turned ON
MANUAL / AUTO
Compressor Mode
AUTO
Function to automatically turn A/C ON by pressing AUTO button when blower is ON and A/C is OFF
MANUAL / AUTO
Compressor / Air Inlet DEF Operation
LINK
Function to automatically turn A/C ON linked with FRONT DEF button when A/C is OFF
NORMAL / LINK
Evaporator Control
AUTO
Function to set evaporator control to AUTOMATIC position (AUTO) to save power, or to coldest position (MANUAL) to dehumidify air and to prevent windows from fogging up
MANUAL / AUTO
Foot / DEF Auto Mode
ON
Function to automatically turn airflow from FOOT/DEF ON when AUTO MODE is ON
OFF / ON
Foot / DEF Automatic Blow Up Function
ON
Function to automatically increase blower level when defroster is ON
OFF / ON
← HOW TO PROCEED WITH TROUBLESHOOTING (from Jul 2010)PROBLEM SYMPTOMS TABLE (May 2007 – Jul 2008) →