2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from May 2007


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Read the DTC by following the prompts on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Erase the DTC by following the directions on the tester screen.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

← DIAGNOSIS SYSTEM (from May 2007)DATA LIST / ACTIVE TEST (May 2007 – Jun 2010) →