2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

63-41 Wrong Disc

Diagnostic trouble codes · Vehicles built May 2007 – Jul 2008

Also covers:

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010

DESCRIPTION

DTC No.
DTC Detection Condition
Trouble Area
63-41
An unsuitable disc is inserted.
  1. CD
  2. Navigation receiver assembly
63-42
The disc cannot be read.

INSPECTION PROCEDURE

HINT:
After the inspection is completed, clear the DTCs.


1. CHECK DISC

  1. I100152
    Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


2. DISC CLEANING

  1. I100151
    Disc cleaning
    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or anti-static preservative.


NEXT


3. CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


4. RECHECK FOR DTC
  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    The same trouble does not occur.



NG
Go to step 5
OK

END

5. REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with another and recheck.

    1. Replace the disc with another normal one.

    2. Clear the DTCs (Click here).

    3. Recheck for DTCs and check if the same trouble occurs again.

      OK:
      The same trouble does not occur.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END


← 63-10 CD Changer Mechanical Error (+ 63-11, 63-12) (Aug 2008 – Jun 2010)63-41 Wrong Disc (+ 63-42) (Aug 2008 – Jun 2010) →