Black Screen
Circuit diagnosis · Vehicles built May 2007 – Jul 2008
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
INSPECTION PROCEDURE
| 1. CHECK DISPLAY SETTING |
 |
Check that the display is not in "Screen OFF" mode.
- OK:
- The display setting is not in "Screen OFF" mode.
|
NG |
 |
|
| CHANGE SCREEN TO "SCREEN ON" MODE |
|
|
| OK |
|
 |
|
| 2. CHECK IMAGE QUALITY SETTING |
 |
Check that the screen color quality can be set.
- OK:
- Setting is possible.
|
NG |
 |
|
|
|
| OK |
|
 |
|
| PRESS PANEL SWITCH "DISPLAY" AND SET SCREEN COLOR QUALITY TO NORMAL |
|
| 3. CHECK CABIN |
 |
Check that condensation is not likely to occur in the cabin, and that the temperature is not high or extremely low in the cabin.
- HINT:
- A humid cabin and a rapid change in temperature may lead to condensation. Condensation in the cabin may cause a short circuit.
- The appropriate cabin temperature is 20 to 30°C (68 to 86°F).
- OK:
- Condensation is not likely being produced and the temperature is not high or extremely low.
|
NG |
 |
|
| SET CABIN TO APPROPRIATE TEMPERATURE |
|
|
| OK |
|
 |
|
| PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
|
|