2007-2013 Highlander Kluger · Service Manual STEERING

C1554 Power Supply Relay Failure

Diagnostic trouble codes · Vehicles built Aug 2008 – Jun 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

DESCRIPTION

If the power steering ECU detects these DTCs, it will shut off the motor relay circuit (built into the power steering ECU) and stops power assist.
DTC No.
DTC Detection Condition
Trouble Area
C1554
Power source relay circuit malfunction
Power steering ECU

INSPECTION PROCEDURE


1. RECONFIRM DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs (Click here).

    OK:
    DTC is not output.



NG
REPLACE POWER STEERING ECU (Click here)
OK

CHECK INTERMITTENT PROBLEMS


← C1554 Power Supply Relay Failure (May 2007 – Jul 2008)C1554 Power Supply Relay Failure (from Jul 2010) →