C1528 Motor Rotation Angle Sensor Malfunction
Diagnostic trouble codes · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
DESCRIPTION
The motor rotation angle sensor detects the motor rotation angle and sends this information to the power steering ECU.| DTC No. |
DTC Detection Condition |
Trouble Area |
| C1528 |
Motor rotation angle sensor malfunction |
|
WIRING DIAGRAM


INSPECTION PROCEDURE
| 1. CHECK CONNECTOR CONNECTION CONDITION |
Check the installation condition of the motor rotation angle sensor connector.
- OK:
- Motor rotation angle sensor connector is securely connected to the power steering ECU.
- Result:
Result
Proceed to
NG
A
OK
B
|
|
||||
| A | |
| 2. RECONFIRM DTC |
Reinstall motor rotation angle sensor connector.
Check for DTCs (Click here).
- OK:
- DTC is not output.
- Result:
Result
Proceed to
DTC is output
A
DTC is not output
B
|
|
||||
| A | |
| 3. READ VALUE USING INTELLIGENT TESTER (MOTOR ROTATION ANGLE SENSOR) |
Turn the ignition switch off.
Connect the intelligent tester to the DLC3.
Turn the ignition switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Chassis / EMPS / Data List.
Select the item "Motor Rotation Angle" in the Data List and read the value displayed on the intelligent tester.
EMPS: Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
Motor Rotation Angle
Motor rotation angle:
Min.: 0°
Max.: 360°
During steering operation, motor rotation angle value changes from 0 to 360°
Ignition switch on (IG) and steering wheel is turned
- OK:
- During steering operation, motor rotation angle value changes from 0 to 360°
|
|
||||
| OK | ||
| ||
