DISASSEMBLY
Removal / installation · Vehicles built from May 2007
| 1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY |
Disengage the 4 claws and remove the No. 1 air duct sub-assembly.

| 2. REMOVE AIR FILTER CASE |
Disengage the 2 claws and remove the air filter case.

| 3. REMOVE CLEAN AIR FILTER |
Remove the clean air filter as shown in the illustration.

| 4. REMOVE AIR INLET SERVO MOTOR SUB-ASSEMBLY |
Remove the 3 screws and air inlet servo motor sub-assembly.

| 5. REMOVE FRONT BLOWER MOTOR SUB-ASSEMBLY |
Remove the 3 screws and front blower motor sub-assembly.

