REASSEMBLY
Removal / installation · Vehicles built from May 2007
| 1. INSTALL FRONT BLOWER MOTOR SUB-ASSEMBLY |
Install the front blower motor sub-assembly with the 3 screws.

| 2. INSTALL AIR INLET SERVO MOTOR SUB-ASSEMBLY |
Install the air inlet servo motor sub-assembly with the 3 screws.

| 3. INSTALL CLEAN AIR FILTER |
Install the clean air filter as shown in the illustration.

| 4. INSTALL AIR FILTER CASE |
Engage the 2 claws to install the air filter case.

| 5. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY |
Engage the 4 claws to install the air duct sub-assembly.

