2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from May 2007


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the intelligent tester on.

  3. Enter the following menus: Body Electrical / Trouble Codes.

  4. Check for DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch on (IG) and turn the intelligent tester on.

  3. Enter the following menus: Body Electrical / Trouble Code.

  4. Erase DTCs by pressing the YES button on the tester.

← DIAGNOSIS SYSTEM (from Jul 2010)FAIL-SAFE CHART (from May 2007) →