2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

FAIL-SAFE CHART

System information · Vehicles built from May 2007

ENGINE COOLANT TEMPERATURE GAUGE: 
Condition
Response
Recovery
Engine coolant temperature data is interrupted for 3 seconds.
The gauge needle indicates below C.
Engine coolant temperature data is received.
SHIFT INDICATOR: 
Condition
Response
Recovery
Shift position data is interrupted for 3 seconds.
All indicator lights go off.
Normal data is received.
ABS, EBD, BA, TRC, AND VSC: 
Condition
Response
Recovery
ABS, brake or slip data is interrupted for 1 second.
The warning light comes on.
Normal data is received.
DOOR: 
Condition
Response
Recovery
Each door condition data is interrupted for 10 seconds.
The data received most recently remains indicated.
Normal data is received.
DRIVER SIDE SEAT BELT: 
Condition
Response
Recovery
Driver side front seat inner belt assembly data is interrupted for 10 seconds.
The data received most recently remains indicated.
Normal data is received.
TAIL: 
Condition
Response
Recovery
Regular data is interrupted for 10 seconds.
The data received most recently remains indicated.
Normal data is received.
BEAM: 
Condition
Response
Recovery
Regular data is interrupted for 10 seconds.
The data received most recently remains indicated.
Normal data is received.
AIRBAG: 
Condition
Response
Recovery
Airbag data is interrupted for 10 seconds or there is a malfunction in the combination meter (meter CPU).
The warning light comes on.
Normal data is received.
FRONT PASSENGER SIDE SEAT BELT: 
Condition
Response
Recovery
Regular data is interrupted.
The data received most recently remains indicated.
Normal data is received.
FRONT FOG LIGHT: 
Condition
Response
Recovery
Regular data is interrupted for 10 seconds.
The data received most recently remains indicated.
Normal data is received.
EPS WARNING LIGHT: 
Condition
Response
Recovery
Regular data is interrupted for 1 second.
The warning light comes on.
Normal data is received.
MULTI-INFORMATION DISPLAY (*): 
Condition
Response
Recovery
Cruise information data is interrupted for 60 seconds.
The display becomes blank (only measurement units are displayed).
Normal data is received.
*: w/ Multi-information Display
← DTC CHECK / CLEAR (from May 2007)DATA LIST / ACTIVE TEST (from May 2007) →