2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT POWER BACK DOOR TOUCH SENSOR

B165213E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Not pressed
    Approx. 1 kΩ
    1 - 2
    Pressed
    Below 100 Ω

    If the result is not as specified, replace the sensor.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →