2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. REMOVE BACK WINDOW UPPER TRIM PANEL ASSEMBLY

  1. B173198
    Disengage the 4 clips and 4 claws, and remove the back window upper trim panel assembly.


2. REMOVE BACK DOOR SERVICE HOLE COVER LH

  1. B173200
    Disengage the 6 claws, and remove the back door service hole cover LH.


3. DISCONNECT POWER BACK DOOR ROD

  1. B173201
    Disconnect the power back door rod and remove the back door stay plate.


4. REMOVE BACK DOOR TRIM COVER LH

  1. B173202
    Disengage the 2 clips and 2 claws, and remove the back door trim cover LH.


5. REMOVE BACK DOOR TRIM COVER RH

  1. B174214
    Disengage the 2 clips and 2 claws, and remove the back door trim cover RH.


6. REMOVE BACK DOOR LOCK COVER

  1. B173203
    Disengage the 2 claws and 4 guides, and remove the back door lock cover.


7. REMOVE ASSIST STRAP HOLE COVER

  1. B177265
    Disengage the 2 claws and 2 guides, and remove the assist strap hole cover.


8. REMOVE ASSIST STRAP ASSEMBLY

  1. B177264
    Remove the bolt and assist strap assembly.


9. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

  1. B174211
    Disengage the 16 clips and remove the back door trim panel assembly.


10. REMOVE POWER BACK DOOR SENSOR ASSEMBLY

  1. B174177
    Disconnect the connector.

  1. Remove the 4 bolts.

  1. Disengage the 2 clips and remove the power back door sensor assembly.

← REMOVAL (May 2007 – Jun 2010)INSPECTION (from May 2007) →