2007-2013 Highlander Kluger · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built from May 2007


1. INSTALL COOLING FAN ECU

  1. A169453
    Install the ECU with the 2 screws.

    Torque:
    2.6 N*m{ 27 kgf*cm , 23 in.*lbf }

  1. A169455
    Connect the No. 1 cooling fan motor and No. 2 cooling fan motor connectors.

  1. A169454
    Connect the FAN ECU connector.

← REMOVAL (from May 2007)ON-VEHICLE INSPECTION (from May 2007) →