INSTALLATION
Removal / installation · Vehicles built from Jul 2010
| 1. INSTALL HEADLIGHT LEVELING SWITCH |
Engage the 2 claws and install the headlight leveling switch.
| 2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System) |
Connect the hood lock control cable assembly.

Connect each connector.
Engage the 3 claws and 10 clips.
Install the lower instrument panel finish panel sub-assembly with the 2 bolts <B>.
| 3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System) |
Connect the hood lock control cable assembly.

Connect each connector and the aspirator duct.
Engage the 3 claws and 10 clips.

Install the lower instrument panel finish panel sub-assembly with the 2 bolts <B>.
| 4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH |
Engage the claw and clip, install the cowl side trim sub-assembly LH.

Install the clip.
| 5. INSTALL FRONT DOOR SCUFF PLATE LH |
Engage the guide and 8 claws, and install the front door scuff plate LH.

