2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT WIRELESS DOOR LOCK BUZZER

  1. B144393E02
    Measure the resistance according to the value(s) in the table below.

    HINT:
    The buzzer activation circuit is built into the ECU, not into the buzzer itself. When battery voltage is applied directly to the buzzer, the buzzer will not sound.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    A42-1 - A42-2
    Always
    950 to 1050 Ω

    If the result is not as specified, replace the wireless door lock buzzer.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →