2007-2013 Highlander Kluger · Service Manual HEATER & AIR CONDITIONING SYSTEM

REASSEMBLY

Removal / installation · Vehicles built from May 2007


1. INSTALL COOLER DRYER

  1. E150343
    Using pliers, install the cooler dryer to the modulator.

  1. E101932
    Apply sufficient compressor oil to an O-ring and the cap fitting surface.

    Compressor oil:
    ND-OIL 8 or equivalent

  1. E150344E01
    Using a 14 mm straight hexagon wrench, install the cap to the cooler condenser core.

    Torque:
    2.9 N*m{ 30 kgf*cm , 26 in.*lbf }

← DISASSEMBLY (from May 2007)INSTALLATION (May 2007 – Jul 2008) →