INSTALLATION
Removal / installation · Vehicles built May 2007 – Jul 2008
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL ELECTRICAL KEY OSCILLATOR |
 |
- Connect the connector.
Install the indoor electrical key oscillator with the clamp.
| 2.
INSTALL CONSOLE BOX ASSEMBLY (w/o Rear Air Conditioning System)
|
 |
- Engage the 6 claws.
- Install the console box assembly with the 4 bolts and 2 screws.
| 3.
INSTALL CONSOLE BOX ASSEMBLY (w/ Rear Air Conditioning System)
|
 |
- Engage the 6 claws.
Connect the connector.
- Install the console box assembly with the 4 bolts and 2 screws.
| 4.
INSTALL LOWER REAR CONSOLE BOX
|
 |
Install the lower rear console box.
| 5.
INSTALL NO. 2 CONSOLE BOX DUCT (w/o Rear Air Conditioning System)
|
 |
- Install the No. 2 console box duct as shown in the illustration.
| 6.
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
|
 |
- Connect the connector.
Engage the 4 claws and 4 clips, and install the upper console panel sub-assembly.
| 7.
INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY
|
 |
- Apply protective tape to the areas shown in the illustration.
Connect each connector.
Engage the 10 claws and 8 clips, and install the center instrument cluster finish panel assembly.
- NOTICE:
- Do not the damage the instrument panel safety pad assembly and lower instrument panel finish panel sub-assembly.