2007-2013 Highlander Kluger · Service Manual STEERING

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing the steering wheel (Click here).


1. POSITION FRONT WHEELS STRAIGHT AHEAD

2. REMOVE STEERING PAD
(Click here)

3. REMOVE STEERING WHEEL ASSEMBLY

  1. C165708E01
    Remove the steering wheel assembly set nut.

  1. Put matchmarks on the steering wheel assembly and the steering main shaft.

  1. Disconnect the connectors from the spiral cable.

  1. C165709E01
    Using SST, remove the steering wheel assembly.
    SST
    09950-50013   (09951-05010, 09952-05010, 09953-05020, 09954-05021)

    NOTICE:
    Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.

← REMOVAL (Aug 2008 – Jun 2010)DISASSEMBLY (May 2007 – Jul 2008) →