2007-2013 Highlander Kluger · Service Manual STEERING

DISASSEMBLY

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

  1. E150160
    Remove the 2 screws.

  1. Disconnect the connector.

  1. E150161
    Remove the cruise control main switch as shown in the illustration.


2. REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)

  1. E150585
    Disconnect the pad switch connector from the spiral cable.

  1. Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch.

  1. E150586
    Remove the screw.

  1. Disengage the 2 pins and remove the steering pad switch assembly.


3. REMOVE NO. 2 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)

  1. C165710
    Remove the screw.

  1. C165711
    Disengage the 2 pins to remove the No. 2 steering wheel ornament from the steering wheel spoke sub-assembly.


4. REMOVE NO. 1 STEERING WHEEL ORNAMENT (w/o Steering Pad Switch)

HINT:
Perform the same procedure as for the No. 2 steering wheel ornament.


5. REMOVE LOWER STEERING WHEEL BOSS COVER

  1. C165712
    Remove the 2 screws.

  1. C165713
    Disengage the 4 claws to remove the lower steering wheel boss cover from the steering wheel spoke sub-assembly.


6. REMOVE STEERING PAD ATTACHING SCREW

  1. C165714
    Remove the 2 steering pad attaching screws from the lower steering wheel boss cover.

← REMOVAL (from Jul 2010)DISASSEMBLY (Aug 2008 – Jun 2010) →