2007-2013 Highlander Kluger · Service Manual BODY

INSTALLATION

Removal / installation · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL LOWER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)

  1. B172756
    Engage the 4 claws and install the lower radiator grille moulding LH.


2. INSTALL LOWER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.


3. INSTALL CENTER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)

  1. B172755
    Engage the 4 claws and install the center radiator grille moulding LH.


4. INSTALL CENTER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.


5. INSTALL UPPER RADIATOR GRILLE MOULDING LH (w/ Plated Moulding)

  1. B172754
    Engage the 4 claws and install the upper radiator grille moulding LH.


6. INSTALL UPPER RADIATOR GRILLE MOULDING RH (w/ Plated Moulding)

HINT:
Use the same procedure for the RH side and LH side.


7. INSTALL INSIDE RADIATOR GRILLE (w/ Plated Moulding)

  1. B172753
    Engage the 9 claws and install the inside radiator grille.

  1. B172752
    Install the 7 screws.


8. INSTALL RADIATOR GRILLE EMBLEM

  1. B172750
    Engage the 3 claws and install the radiator grille emblem.


9. INSTALL RADIATOR GRILLE

  1. B172748
    Engage the 4 guides and 6 claws, and install the radiator grille.

  1. B172746
    Install the 4 clips and 2 bolts.


10. INSTALL COOL AIR INTAKE DUCT SEAL

  1. B172745
    Install the cool air intake duct seal with the 11 clips.

← REMOVAL (from Jul 2010)INSTALLATION (from Jul 2010) →