2007-2013 Highlander Kluger · Service Manual BODY

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. REMOVE COOL AIR INTAKE DUCT SEAL

  1. B258270
    Remove the 11 clips and cool air intake duct seal.


2. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

  1. B258273E01
    Put protective tape around the radiator grille sub-assembly.
    Text in Illustration 
    *1
    Protective Tape

  1. B258271
    Remove the 6 clips.

  1. Disengage the 8 claws and 2 guides, and remove the radiator grille sub-assembly.


3. REMOVE HOOD TO RADIATOR GRILLE SEAL

  1. B258268
    Disengage the 15 clips and remove the hood to radiator grille seal.


4. REMOVE RADIATOR GRILLE EMBLEM

  1. B258269
    Disengage the 3 claws and guide, and remove the radiator grille emblem.

← REMOVAL (May 2007 – Jun 2010)INSTALLATION (May 2007 – Jun 2010) →