2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from May 2007


1. INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

  1. E151096
    Engage the claw and install the windshield wiper switch assembly.

  1. Connect the 2 connectors.


2. INSTALL STEERING COLUMN COVER

  1. E151094
    Engage the claw and install the upper steering column cover.

  1. E151095
    Engage the 2 claws and install the lower steering column cover.

  1. E151101
    Turn the steering wheel assembly to the left and install the screw as shown in the illustration.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

  1. E151100
    Turn the steering wheel assembly to the right and install the screw as shown in the illustration.

    Torque:
    2.0 N*m{ 20 kgf*cm , 18 in.*lbf }

← INSPECTION (from May 2007)COMPONENTS (May 2007 – Jun 2010) →