2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from May 2007


1. REMOVE STEERING COLUMN COVER

  1. E151100
    Turn the steering wheel assembly to the right and remove the screw as shown in the illustration.

  1. E151101
    Turn the steering wheel assembly to the left and remove the screw as shown in the illustration.

  1. E151095
    Disengage the 2 claws and remove the lower steering column cover.

  1. E151094
    Disengage the claw and remove the upper steering column cover.


2. REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

  1. E151096
    Disconnect the 2 connectors.

  1. Disengage the claw and remove the windshield wiper switch assembly.

    NOTICE:
    If the claw is pushed with excessive force, it may break.

← COMPONENTS (from May 2007)INSPECTION (from May 2007) →