REMOVAL
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
REMOVE FRONT DOOR SCUFF PLATE LH
|
 |
- Disengage the 8 claws and guide, and remove the front door scuff plate LH.
| 2.
REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
|
 |
- Remove the clip.
Disengage the clip and claw, and remove the cowl side trim sub-assembly LH.
| 3.
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)
|
 |
- Remove the 2 bolts <B>.
Disengage the 3 claws and 10 clips.
Disconnect each connector.
Disconnect the hood lock control cable assembly and remove the lower instrument panel finish panel sub-assembly.
| 4.
REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)
|
 |
- Remove the 2 bolts <B>.
Disengage the 3 claws and 10 clips.
- Disconnect each connector and the aspirator duct.
Disconnect the hood lock control cable assembly and remove the lower instrument panel finish panel sub-assembly.
| 5.
REMOVE LIGHT CONTROL RHEOSTAT |
 |
- Disengage the 2 claws and remove the light control rheostat.