REASSEMBLY
Removal / installation · Vehicles built Aug 2008 – Jun 2010
Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010
| 1.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
|
 |
- Engage the 5 hooks.
- Install the front passenger airbag assembly with the 5 hooks on the instrument panel safety pad assembly.
- Install the 2 screws.
| 2.
INSTALL COOLER SWITCH HOLE COVER (w/o Automatic Light Control System) |
 |
- Engage the 2 claws and install the cooler switch hole cover.
| 3.
INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)
|
 |
- Engage the 2 claws and install the automatic light control sensor.
Connect the connector.
| 4.
INSTALL NO. 4 INSTRUMENT PANEL WIRE (for LHD) |
 |
- Engage the 5 clamps.
Connect the connector and install the No. 4 instrument panel wire.
| 5.
INSTALL NO. 4 INSTRUMENT PANEL WIRE (for RHD) |
 |
- Engage the 5 clamps.
Connect the connector and install the No. 4 instrument panel wire.
| 6.
INSTALL ANTENNA CORD SUB-ASSEMBLY (for Pole Antenna Type)
|
 |
Engage the 9 clamps and install the antenna cord sub-assembly.


| 7.
INSTALL ANTENNA CORD SUB-ASSEMBLY (for Glass Antenna Type)
|
 |
Engage the 9 clamps and install the antenna cord sub-assembly.


| 8.
INSTALL NAVIGATION ANTENNA ASSEMBLY
|
 |
- Install the navigation antenna with the 2 screws.
- Engage the 3 clamps and install the navigation antenna assembly.
| 9.
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY |
 |
- Install the No. 2 instrument panel register assembly with the 3 screws <F>.
| 10.
INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY |
 |
- Install the No. 1 instrument panel register assembly with the 3 screws <F>.
| 11.
INSTALL CENTER HEATER TO REGISTER SUB DUCT |
 |
- Install the center heater to register sub duct with the 2 screws <F>.
| 12.
INSTALL DEFROSTER NOZZLE ASSEMBLY |
 |
- Install the defroster nozzle assembly with the 3 screws <F> and clip.
| 13.
INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT |
 |
- Install the side No. 2 defroster nozzle duct with the screw <F>.
| 14.
INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT |
 |
- Install the side No. 1 defroster nozzle duct with the screw <F>.
| 15.
INSTALL NO. 4 HEATER TO REGISTER DUCT |
 |
- Install the No. 4 heater to register duct with the 3 screws <F>.
| 16.
INSTALL NO. 1 HEATER TO REGISTER DUCT |
 |
- Install the No. 1 heater to register duct with the 3 screws <F>.