2007-2013 Highlander Kluger · Service Manual BODY

REASSEMBLY

Removal / installation · Vehicles built May 2007 – Jul 2008

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

  1. C168042
    Engage the 5 hooks.

  1. C165105
    Install the front passenger airbag assembly with the 5 hooks on the instrument panel safety pad assembly.

  1. C165104
    Install the 2 screws.


2. INSTALL COOLER SWITCH HOLE COVER (w/o Automatic Light Control System)

  1. B172998
    Engage the 2 claws and install the cooler switch hole cover.


3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)

  1. E150082
    Engage the 2 claws and install the automatic light control sensor.

  1. Connect the connector.


4. INSTALL NO. 4 INSTRUMENT PANEL WIRE (for LHD)

  1. B168385
    Engage the 5 clamps.

  1. Connect the connector and install the No. 4 instrument panel wire.


5. INSTALL NO. 4 INSTRUMENT PANEL WIRE (for RHD)

  1. B168386
    Engage the 5 clamps.

  1. Connect the connector and install the No. 4 instrument panel wire.


6. INSTALL ANTENNA CORD SUB-ASSEMBLY (for Pole Antenna Type)

  1. Engage the 9 clamps and install the antenna cord sub-assembly.

    E150566


7. INSTALL ANTENNA CORD SUB-ASSEMBLY (for Glass Antenna Type)

  1. Engage the 9 clamps and install the antenna cord sub-assembly.

    E151137E01


8. INSTALL NAVIGATION ANTENNA ASSEMBLY

  1. E150590
    Install the navigation antenna with the 2 screws.

  1. E150591
    Engage the 3 clamps and install the navigation antenna assembly.


9. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY

  1. B168384
    Install the No. 2 instrument panel register assembly with the 3 screws <F>.


10. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

  1. B168383
    Install the No. 1 instrument panel register assembly with the 3 screws <F>.


11. INSTALL CENTER HEATER TO REGISTER SUB DUCT

  1. B168382
    Install the center heater to register sub duct with the 2 screws <F>.


12. INSTALL DEFROSTER NOZZLE ASSEMBLY

  1. B173016
    Install the defroster nozzle assembly with the 3 screws <F> and clip.


13. INSTALL SIDE NO. 2 DEFROSTER NOZZLE DUCT

  1. B168381
    Install the side No. 2 defroster nozzle duct with the screw <F>.


14. INSTALL SIDE NO. 1 DEFROSTER NOZZLE DUCT

  1. B168380
    Install the side No. 1 defroster nozzle duct with the screw <F>.


15. INSTALL NO. 4 HEATER TO REGISTER DUCT

  1. B168379
    Install the No. 4 heater to register duct with the 3 screws <F>.


16. INSTALL NO. 1 HEATER TO REGISTER DUCT

  1. B168378
    Install the No. 1 heater to register duct with the 3 screws <F>.

← DISASSEMBLY (from Jul 2010)REASSEMBLY (Aug 2008 – Jun 2010) →