2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built May 2007 – Jun 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL REAR FOG LIGHT ASSEMBLY

  1. E155682
    Install the rear fog light assembly.


2. INSTALL REAR FOG LIGHT BRACKET

  1. E150828
    Engage the 4 claws and install the rear fog light bracket.

  1. E150062
    Engage the clamp.

  1. E150608
    Tighten the 2 screws.


3. INSTALL REAR BUMPER ASSEMBLY
  1. Connect the rear fog light connector, and then install the rear bumper assembly.

  1. B175998
    Engage the 8 claws.

    HINT:
    Use the same procedure for the RH side and LH side.

  1. B172735
    Install the 5 clips, 8 screws and 2 bolts.

← REASSEMBLY (from May 2007)INSTALLATION (from Jul 2010) →