2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from May 2007


1. INSTALL REAR FOG LIGHT BULB
  1. Install the rear fog light bulb to the rear light socket and wire.

  1. E150065
    Turn the rear fog light bulb and rear light socket and wire in the direction indicated by the arrow and install them as a unit.


2. INSTALL FOG LIGHT PROTECTOR
  1. Install the fog light protector to the rear fog light body.


3. INSTALL REAR FOG LIGHT LENS

  1. E150610
    Install the rear fog light lens.

  1. Temporarily install the 2 screws as shown in the illustration.

← DISASSEMBLY (from May 2007)INSTALLATION (May 2007 – Jun 2010) →