REMOVAL
Removal / installation · Vehicles built from Jul 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| 1.
REMOVE REAR QUARTER PANEL MUDGUARD LH
|
 |
- Remove the 2 screws (A).
Using a 4 mm hexagon wrench, remove the 3 screws (B).
| 2.
REMOVE REAR QUARTER PANEL MUDGUARD RH
|
 |
- HINT:
- Use the same procedure for the RH side and LH side.
| 3.
REMOVE REAR BUMPER ASSEMBLY
|
 |
- Put protective tape around the rear bumper assembly.
Text in Illustration
*1
|
Protective Tape
|
- Remove the 2 screws.
- HINT:
- Use the same procedure for the RH side and LH side.
- Remove the 5 clips, 2 screws and 2 bolts.
- Disengage the 7 claws and disconnect the rear bumper assembly.
- HINT:
- Use the same procedure for the RH side and LH side.
w/ Rear Fog Light:
Disconnect the rear fog light connector, and remove the rear bumper assembly.
| 4.
REMOVE REAR FOG LIGHT BRACKET |
 |
- Loosen the 2 screws as shown in the illustration.
- Disengage the clamp.
- Disengage the 4 claws and remove the rear fog light bracket.
| 5.
REMOVE REAR FOG LIGHT ASSEMBLY |
 |
- Remove the rear fog light assembly.