2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REASSEMBLY

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jun 2010 from Jul 2010


1. INSTALL BACK UP LIGHT BULB
  1. Install the back up light bulb to the back up light socket.

  1. E212234
    Turn the back up light bulb and the back up light socket in the direction indicated by the arrow and install them as a unit.


2. INSTALL TAIL AND STOP LIGHT BULB
  1. Install the tail and stop light bulb to the tail and stop light socket.

  1. E212232
    Turn the tail and stop light bulb and the tail and stop light socket in the direction indicated by the arrow and install them as a unit.


3. INSTALL REAR TURN SIGNAL LIGHT BULB
  1. Install the rear turn signal light bulb to the rear turn signal light socket.

  1. E212230
    Turn the rear turn signal light bulb and the rear turn signal light socket in the direction indicated by the arrow and install them as a unit.


4. INSTALL REAR COMBINATION LIGHT BODY GASKET

  1. E212228
    Install a new rear combination light body gasket.


5. INSTALL REAR BUMPER SIDE SUPPORT

  1. E212227
    Engage the claw to install the rear bumper side support.

← REASSEMBLY (May 2007 – Jun 2010)INSTALLATION (May 2007 – Jul 2008) →