REASSEMBLY
Removal / installation · Vehicles built May 2007 – Jun 2010
Versions by build date: May 2007 – Jun 2010 from Jul 2010
| 1.
INSTALL REAR BUMPER SIDE SUPPORT |
 |
- Engage the 2 claws and install the rear bumper side support.
| 2.
INSTALL TAIL AND STOP LIGHT BULB |
 |
Install the tail and stop light bulb to the tail and stop light socket.
- Turn the tail and stop light bulb and the tail and stop light socket in the direction indicated by the arrow and install them as a unit.
| 3.
INSTALL REAR TURN SIGNAL LIGHT BULB |
 |
Install the rear turn signal light bulb to the rear turn signal light socket.
- Turn the rear turn signal light bulb and the rear turn signal light socket in the direction indicated by the arrow and install them as a unit.
| 4.
INSTALL BACK UP LIGHT BULB |
 |
Install the back up light bulb to the back up light socket.
- Turn the back up light bulb and the back up light socket in the direction indicated by the arrow and install them as a unit.
| 5.
INSTALL REAR COMBINATION LIGHT BODY GASKET |
 |
- Install a new rear combination light body gasket.