2007-2013 Highlander Kluger · Service Manual BODY ELECTRICAL

REMOVAL

Removal / installation · Vehicles built from Jul 2010

Versions by build date: May 2007 – Jul 2008 Aug 2008 – Jun 2010 from Jul 2010


1. REMOVE INSTRUMENT PANEL SAFETY PAD ASSEMBLY
(Click here)

2. DISCONNECT INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY (for LHD)

  1. E151587
    Remove the 3 nuts and disconnect the instrument panel junction block assembly.


3. REMOVE POWER STEERING ECU ASSEMBLY (for LHD)

  1. C165549E01
    Disconnect the 4 connectors from the power steering ECU assembly.

  1. C166319
    Remove the 3 nuts and the power steering ECU assembly.


4. REMOVE TURN SIGNAL FLASHER ASSEMBLY (for LHD)

  1. E151586
    Disengage the claw and disconnect the turn signal flasher assembly.

  1. Disconnect the connector and remove the turn signal flasher assembly.


5. REMOVE TURN SIGNAL FLASHER ASSEMBLY (for RHD)

  1. E150614
    Disconnect the connector.

  1. Disengage the claw and remove the turn signal flasher assembly.

← REMOVAL (Aug 2008 – Jun 2010)INSPECTION (from May 2007) →