2007-2013 Highlander Kluger · Service Manual SECURITIES

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT ENGINE HOOD COURTESY SWITCH

  1. Measure the resistance according to the value(s) in the table below.

    B154237E01

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1-2
    LOCK position
    Below 1Ω
    UNLOCK position
    10 kΩ or higher

    If the result is not as specified, replace the hood lock assembly.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →