2007-2013 Highlander Kluger · Service Manual BODY

INSPECTION

Inspection · Vehicles built from May 2007


INSPECT GLASS HATCH OPENER SWITCH ASSEMBLY

  1. B172580E01
    Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Pushed
    10 kΩ or higher
    Not pushed
    Below 1 Ω

    If the result is not as specified, replace the glass hatch opener switch assembly.

← REMOVAL (from Jul 2010)INSTALLATION (May 2007 – Jul 2008) →